E-mon Energy Software User Manual download pdf (Page 63)

Group and Location

E-Mon Energy User Manual 7-6 E-MON

Figure 7.5 - Group Tab

3 In the Number field, type a Group Number.

Note: Must be a unique number between 1 and 32767. This field is required.

4 In the Name field, type a Group Name. This field is not required; however, we highly

recommend you provide a meaningful name up to 12 characters in length.

5 You may want to set other fields, such as AMR Schedule (Call-in or Call-out), Security,

Load Control, Recorder Parameters, Billing, and Auto Billing Cycle.

6 At this point, you can click on the “√ ”button to accept/save the group record or continue to

complete the remaining fields.

Updating the Device Explorer

7 Every time you add a new group, location, recorder, or meter, click the DEVICE EXPLORER

button, to update the device directory. Note: You will notice that the Group number and

Group name have been added to the device directory.

Selecting the AMR Schedule Call–In (If using with Group Option)

To select an AMR Schedule Call-In:

8 From the AMR Schedule (Call-In) group fields, select Schedule Name, Task, and Server

from each drop-down list for only Schedule 1. Note: If you created and saved an AMR

schedule, Task, and Server, it should appear in the drop-down list. Refer to “AMR” tab for

details. The Event Server is not available.

9 Check the “Enable AMR” box.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 222 223

No comments

E-mon Energy Software User Manual Page 63